How to Fix ‘DNS_PROBE_FINISHED_NXDOMAIN’ Issue on Chrome – Guide

When you see the DNS_PROBE_FINISHED_NXDOMAIN error message, it means that your site is not accessible because it is using a different DNS provider than the one that your computer uses. This can be frustrating because you might have tried to access your site multiple times and each time the error message came up. To fix this, you can try changing your DNS provider or setting up a new domain name.

DNS essentially acts as the phone Internet book. When you type a domain name in the browser, it sends a request to the web server to look for up the IP address and then returns the site in a process called DNS name resolution. Once the browser and the web server are connected, you can access the website. However, if something goes wrong during the process, for example it gets interrupted or doesn’t complete correctly, it will result in a DNS-related error message. Instead of seeing the website you are trying to visit, you may see an error page with DNS_PROBE_FINISHED_NXDOMAIN. It is often accompanied by a message stating “This website cannot be accessed” or “This website is not available”: ..

Fix DNS_PROBE_FINISHED_NXDOMAIN in Chrome

Check the URL again

If you entered an incorrect URL, your computer may not be able to connect to the internet. This could be because your computer’s DNS (Domain Name System) can’t find the IP address associated with the URL you entered. ..

Disable Chrome Flags

Chrome flags are experimental in nature and are used for beta testing features before your final release. These flags span a wide domain and some are uniquely targeted to the network.

If you enabled network-related flags on your Chrome browser, you may want to revert them to their original state on the chrome://flags page. The Default status should be most likely the correct option.

Release and renew your IP address

  1. Open the Windows Control Panel and click on the IP Address tab.
  2. Scroll down to the bottom and click on the “Release IP Address” button.
  3. Enter your current IP address into the text field and click on the “Release” button.
  4. Click on the “Renew IP Address” button to confirm your changes and then click on the “Save” button to finish.

and type “cmd” to open the command prompt.

Cmd is a command line tool that can be used to launch programs and commands as administrator. To use cmd as administrator, you must first create a new account and set the permissions for it.

git push origin master git push git push origin master

The first command will flush the currently assigned IP address, the second will flush the DNS cache for that address, and the third and final command will replace it with a new IP address. If all three commands are executed, restart your PC and see if it gives any favorable results or not.

reset winsock

  1. Open the Start Menu and type “cmd” and hit enter.
  2. Type “netstat -a” and hit enter.
  3. If the output looks like this, then Windows Socket has been reset successfully: tcp 0 0 0:0:0 10.0.0.1 tcp 0 0 1:10.0.0.2 udp 0 0 10:50:50 192.168.1.1

To launch the command prompt as an administrator, type “cmd” and press Enter. ..

grep -v ‘^.*$’ /etc/passwd This will grep through the contents of the /etc/passwd file, looking for any matches that match the given string.

This is a question.

Change DNS servers

  1. Open the Control Panel by clicking on the Start button and typing “control panel” in the search box.
  2. Click on Network and Internet, and then on Network and Sharing Center.
  3. Under the network connections heading, click on your connection name (for example, Ethernet connection 1).
  4. On the Properties tab, under Internet Protocol Version 4 (TCP/IPv4), click on Properties.
  5. In the General tab, under Preferred DNS server address, type the new DNS server address in the Preferred DNS server box and then click OK. Now you can restart your computer to apply these changes:
  6. Click on Start and type “restart” in the search box.
  7. Click Restart now to apply these changes immediately or after a delay of 30 minutes or so (depending on your computer’s settings). ..

Launch the Control Panel from the Start menu.

Open the Network and Sharing Center to enable easy sharing of files and folders between your computer and other devices.

Click on the Change Adapter Settings link on the left menu bar.

In the Properties window, click the Connections tab. In the Connections section, click the name of your current network connection. In the next pane, you’ll see a list of all of your connected devices. If you have any other devices connected to this network (like a computer or phone), they will be listed in the Devices pane as well. If you don’t have any devices connected to this network, then the Devices pane will be empty.

On the General tab, under Protocols, click Add. In the Add Protocol dialog box, type IPv4 and click OK. Now on the General tab, under Protocols, click Properties button. On the General tab, under Protocols, click the IPv4 tab. In the IPv4 Properties dialog box, set the following values: -IPv4 Address: 192.168.1.1 -Default Gateway: 192.168.1.254 -Subnet Mask: 255.255.255.0 ..

  1. Select Use the following DNS server address radio button.

  2. Enter the IP address of your computer’s default DNS server.

  3. Click OK to continue. ..

  4. google.com

  5. google.com.tw

  6. googleusercontent.com

  7. googletagmanager.com

The preferred DNS server is 8.8.8.8, which is known to be a reliable and fast DNS server. ..

Alternate DNS Server: 8.8.4.4 and 8.8.2.2

After clicking OK, you will be prompted to enter a new password. Enter the new password and click OK. You have successfully changed your password. ..

Final note

If you’re experiencing an issue with Chrome where your DNS probe is finishing prematurely, this guide will help you fix it. If you have any questions about the article, feel free to ask us in the comments. Additionally, please share this article with your friends to help spread the word! ..