How to Fix a DPC Watchdog Violation Error in Windows 11 – Guide

Windows computers are prone to the Blue Screen of Death (BSOD), which is a problem with the computer’s operating system. One of the most common BSOD errors is the DPC_WATCHDOG_VIOLATION stop code error. This error can lock your computer and prevent you from using it. If this happens, it can be quite frustrating. This article will teach you how to fix the DPC watchdog violation issue on your Windows computer. ..

What is Windows 11 DPC Watchdog Violation?

If you are using an SSD on your Windows 10 PC, it is first important to check the SSD firmware version. If you have an older SSD that is not supported by the new Windows 10 firmware, then you will need to update it. If you are looking for a way to fix Windows 10 DPC Watchdog Violation, this article is for you.

How to Fix DPC Watchdog Violation in Windows 11

If you are experiencing a DPC watchdog violation error on your Windows 10 computer, disconnect all external devices except the mouse and keyboard to see if the problem persists. If the problem goes away after disconnecting these devices, then one of these devices may be causing the error. To determine which device is causing the problem, add one device back to your computer and see if the error reappears. ..

Disable fast startup

  1. Open the Start menu and click on Settings.
  2. Under System, click on Advanced startup.
  3. Under Fast startup, uncheck the box next to Use fast startup for files that are currently open in Windows Explorer.
  4. Click on OK to save your changes. ..

In the Power Options window, you can control how much power your computer uses. You can choose to turn off your computer completely, or to use a lower power setting that will save energy.

He does a power button on the left side of the panel.

Then you select the Change settings that are currently unavailable option.

You should enable fast startup and uncheck the option to prevent the computer from starting up too slowly. Click Save Changes to save and close.

Check for corrupted system files in Windows 11

To run the command prompt as an administrator, type: netstat -an

netstat -an | grep tcp This command will show you the active TCP connections on your computer.

The next time the system restarts, you’ll type Y to check.

Your computer starts up again, but there is an error. Windows 10 will check your hard drive and fix the error automatically.

Check and fix system files

Secondly, make sure your computer is completely clean. Remove any unnecessary files, cookies, and programs. Thirdly, make sure your computer is up-to-date with the latest security patches. Finally, make sure you are using a secure browser. Firefox, Chrome or Internet Explorer are all good options. ..

To start the command prompt as an administrator, type “cmd” and press Enter. ..

The SFC /SCANNOW command will scan the system for security vulnerabilities and report back with a list of issues.

You will wait a few minutes to complete the process, but it will not be long before you are able to start the process.

You restart your computer and check if the problem is resolved.

Reinstall the video driver in safe mode

  1. Open the Start screen and type “cmd” into the search bar.
  2. Type “netstat -an” and hit enter.
  3. You should see a list of all network connections on your computer, including your local network and the internet. If you don’t see any connections, make sure you have installed the correct video driver for your computer from the manufacturer’s website.

Windows 10: Press the Windows key + R key, type msconfig and click OK to open Windows system configuration. In Windows 10, open the System Configuration window by pressing the Windows key + R key and typing msconfig in the search box. Click OK to open the window. In the System Configuration window, under “Boot” on the left side of the window, make sure that “Enable booting from CD/DVD” is set to “Yes.” If this option is not set to “Yes,” you will need to insert a bootable CD or DVD into your computer in order to start up from it. Under “System startup,” make sure that “Enable automatic restart on system failure” is set to “Yes.” This will allow your computer to restart automatically if it fails during startup. Under “Advanced startup,” make sure that both options are set to “Enabled.” This will allow your computer to start up automatically when you turn it on or when you press a specific button on your keyboard. ..

In the Boot tab, you can choose to safe boot your computer or network. Safe Boot is a feature that helps protect your computer from damage if it is not started by default. You can also select Network and click OK to go to step 3.

To apply these changes, you will need to restart your computer.

In this step, you will enter safe mode. Then you go to the Device Manager. ..

In Windows 10 Device Manager, you can search for and expand display adapters. Once you find the adapter you want, right-click it and click Uninstall. ..

You start your computer in normal mode by restarting it.

Finally, you will install the video driver that you downloaded from the manufacturer’s website.

Update SSD Firmware

  1. Open a command prompt and type “cmd”
  2. Type “ipconfig /flushd”
  3. Type “cmd” again and press enter
  4. Type “ifconfig wlp2s0 down”
  5. Type “cmd” and press enter again to finish the command
  6. To update your SSD, type the following command:
  7. Type “cmd” and press enter to finish the command

Open File Explorer in Windows 10 by pressing the Windows key and selecting Manage.

In the right pane of Device Manager, select Network adapters. Right-click on the network adapter that you want to disable and select Disable. ..

In the right panel, you will find out the SSD type and model number.

After looking up your SSD model number, visit the manufacturer’s website, find the latest firmware version if available, and update to your SSD.

restore your system

  1. Open the Start menu and type “system restore”.
  2. When the System Restore window opens, click on the “Restore system image” button.
  3. In the next window, select the Windows 10 edition that you want to fix DPC Watchdog Violation in.
  4. Click on the “Restore system image” button again.
  5. After restoring your computer, you should see a message that says your computer is now up and running as expected. If not, please follow these steps to fix DPC Watchdog Violation in Windows 10:
  6. Open a command prompt and type “netstat -a | grep dpcwatchdog” to see if there are any active connections or packets being sent or received from the PC with DPC Watchdog Violation enabled

You turn on your computer in safe mode to protect it from potential damage.

To start System Restore, on the Start menu, type System Restore and press Enter. ..

To find the system restore point that was before the DPC Watchdog Violation error started in Windows 10, follow these steps:

  1. Open the Start menu and search for “System Restore.”
  2. When System Restore appears in the results, right-click on it and select “Open.”
  3. On the System Restore window that opens, select the date and time before the DPC Watchdog Violation error started in Windows 10 from the “Restore points” list on the left.
  4. Click on “Start restore” to begin restoring your computer to this point in time. ..

You start your computer by restarting it.

Final note

If you’re experiencing a Windows error that says your computer has a “DPC watchdog violation,” there are a few things you can do to try and fix the problem. This guide will show you how to fix the error, and hopefully it will help get your computer back up and running. ..