How to Eliminate Wi-Fi Deadspots in the House – Guide
Many homeowners struggle with poor Wi-Fi access and often rely on a single router to distribute the Wi-Fi signal to all parts of the network. For example; Owners whose rooms are disconnected from the router suffer from stuttering movie streaming and other reduced download speeds. The solution was to use the house’s internal wiring to distribute the Wi-Fi signal throughout the house. This technology is often referred to as a powerline network. A pair of paired power line adapters transmits high-speed data between two electrical points on the same circuit. The receiving adapter would then resend this data by creating a localized access point.
The other solution is to have your new home pre-wired with Gigabit Ethernet cables when built, or have an electrician run the cables in a pre-fabricated home. Wi-Fi access points or APs are configured on the other end of your home. Cable routing will provide the best throughput, but it is expensive and often not possible due to the layout of the house.
Update router software
If you are experiencing connection and speed issues with your router, it is often best to update the firmware. This can be done by visiting the manufacturer’s website and downloading the latest firmware. The user manual will provide more information on how to install the firmware. ..
Change the channel
Most routers are dual-band, which means they can broadcast Wi-Fi networks operating on two channels: 2.4GHz and 5GHz. If your neighbors’ routers are using the same channel as you, both may be slower. In that case, changing the channel can help.
If your dual-band router is configured correctly, it must broadcast networks on the 2.4GHz and 5GHz channels. The 5GHz channel is less common, so it should be largely traffic-free and much faster than the 2.4GHz. Switch to 5GHz and test your internet speed to see if it’s faster. ..
change the router
If your router is in a corner room, you can improve speed and coverage by placing it in a central location. Walking through drywall, brick or other material can affect the signal. Since rewiring is a lot of work, first try connecting it to a central location with temporary cables to see if that helps with signal strength.
If you have a modem and router in your home, unplug them and connect a longer Ethernet cable to a central location in your home. Then reconnect the modem and router to the temporary cable. Check the signal strength in all rooms. Turn on Wi-Fi on your smartphone, tablet or laptop and move it from room to room.
To define Up a Wi-Fi range extender
To improve your Wi-Fi signal in an area where it is weak or dead, install a desktop or wall plug-in range extender. Then, access the extender with your laptop and program it with your router’s password. ..
Final note
Wi-Fi dead spots are a common problem in homes, and it’s easy to eliminate them. This guide will show you how to do it in your own home. The first step is to identify the Wi-Fi dead spot. This can be done by looking at your network map and seeing where the strongest signals are coming from. If you see a lot of Wi-Fi signals coming from one area, then that area is likely to have a lot of Wi-Fi dead spots. The second step is to find the devices that are using Wi-Fi. You can do this by looking at your router or device and seeing which ones are using Wi-Fi. If you see a lot of devices using Wi-Fi, then it’s likely that there are some areas in your home where there’s not enough coverage. The third step is to make sure that you’re using the right type of Wi-Fi. You can do this by checking your settings and making sure that you’re using the right type of WiFi for your home. If you’re not sure which type of WiFi is best for you, then we recommend trying out some different types of WiFi until you find one that works well for you.
